Manitou MT-X 1030 ST telescopic handler with only 580 operative hour
| Description | |
| The Manitou MT-X 1030 ST telescopic handler offers a 3-ton lift capacity, nearly 10 meters of reach, and rugged off-road performance. | |
| Additional Technical spec. | |
| Performance & Lifting Maximum lifting capacity: 3000 kg Maximum lifting height: 9.98 m Maximum outreach: 7.15 m Load at max height: 2500 kg Load at max outreach: 850 kg Break-out force with bucket: 5330 daN Lifting/lowering time (unladen): 6.7 / 5.4 seconds Extension/retraction time: 13.6 / 8.7 seconds Crowd/dump time: 2.7 / 2.3 seconds Engine & Transmission Engine type: Perkins 1104D-44 TA Power: 101 HP / 74.5 kW Torque: 410 Nm at 1400 rpm Displacement: 4400 cm³ Cooling: Water-cooled Transmission: Mechanical with torque converter (TURNER gearbox) Gears: 4 forward / 4 reverse Max speed: 25 km/h forward Dimensions & Weight Overall length (to fork face): 4.99 m Width over tires: 2.34 m Overall height: 2.30 m Wheelbase: 2.69 m Ground clearance: 0.45 m Turning radius (outside tires): 3.75 m Operating weight (unladen): 7470–7720 kg Hydraulics & Electrical Hydraulic pump: Gear type with flow divider Flow rate: 105–106 l/min Pressure: 250 bar Battery: 12 V – 110 Ah – 750 A Alternator: 12 V – 85 A Starter: 12 V – 3.2 kW Axles, Tyres & Braking Axles: DANA (front rigid, rear oscillating) Differential: Limited slip Tyres: 400/80-24 156 A8 TL Brakes: Multiple-disk brakes in oil bath (front and rear) | |
| Ubication Country | Mexico |
| Manufacturer | Manitou |
| Manufacturer Code | MT-X 1030 ST |
| Status | Good |
| U.M. | Pc. |
| Storage Condition | good |
| Stock Total Quantity | 1.00 |
| Lifting means | Crane |